Overview
Electrode cable connection with IDC termination, with 13E206 Electrode Accessories, without electrode cable.
This generation of electrodes are based on the well-known 13E200 Electrode. Embedded into a mounting suspension of elastic material, this electrode creates an airtight seal between the inner socket and outer socket. If used correctly, the 13E202 Suction Socket Electrode also prevents sweat from penetrating between the outer and inner socket, therefore effectively preventing damage to the electrical and mechanical components caused by corrosion.
The Suction Socket Electrode can not only be used for standard fittings, but is also suitable for application in suction sockets. Combining the suction socket electrode with a 12V10 Tube Valve for a suction socket creates a vacuum effect in the socket, ensuring optimal linkage between the residual limb and the socket.
As with the 13E200 Electrode, state-of-the-art shielding and filtering technologies largely protect the 13E202 Suction Socket Electrode against high frequency interference caused, for example, by cell phones, walkie-talkies, computers or anti-theft systems in shopping centres so that the correct function of the myoelectrically controlled prosthesis is not affected. The electrode contacts are made from pure titanium and as they do not contain nickel, they are also suitable for people with allergies.
Scope of Delivery
- 1 pc. 13E200 electrode
- 1 pc. 13E80 adjustment tool
- 1 pc. 647H490 instructions for use (qualified personnel)
Additional scope of delivery for socket fabrication
- 1 pc. 13E191 casting template for inner socket
- 1 pc. 13E192 lamination template
- 2 pc. 507S15 lamination plate with bore
- 1 pc. 13E201 electrode accessories for vacuum-formed inner sockets
- 2 pc. 503F3 socket screw with Allen head
The following products are also required:
- 757M11 MyoBoy
- 13E129=* electrode cable
